Solder Wire
Ø Solder wire is used to solder electronic components, ICs or jumper.
Composition of most solder wire is Tin / Lead in the ratio 60:40 or 63:37.
Since the introduction of RoHS (Restriction of Hazardous Substances) from
electronics, more and more companies are using lead-free solder.
Ø Lead-free solder wire is available in many compositions but the most
common composition is Tin / Silver / Copper in the Ratio 96.5:3.0:0.5. Solder
wire is available in different diameters such 2.0mm, 1.5mm, 1.0mm, 0.5mm, 0.2mm
etc
.
Ø For mobile phone repairing 0.5mm solder wire is best suitable. Kester is a world renowned
manufacturer and supplier of solder wire and other soldering material.
Thinner or PCB Cleaner
Ø Thinner or PCB cleaner is used to more flex in the PCB. The
most common PCB cleaner used in mobile phone repairing is IPA or Isopropyl
Alcohol.
Ø It is important to buy only good quality PCB cleaner as poor quality PCB
cleaners can damage the board.
Jumper Wire
Ø This is a thin laminated or coated copper wire used to jumper from one
point to another on the track of a mobile phone while repairing. Most people
doing the work of mobile repairing do jumper to solve many problems.
Point Cutter& Nose Cutter
Precision Screwdriver
Ø It is used to remove and tighten screws while assembling and dissembling
a mobile phone.
Ø Precision screwdrivers of sizes T4, T5, T6 and forehead are good for
most mobile repairing job.
Tweezers
Ø These are needed to hold electronic components, ICs, jumper wire etc
while soldering and Desoldering.
Brush
Ø These are used for cleaning the PCB of a mobile phone while repairing.
Ø It is important to buy only ESD-Safe cleaning brushes.
No comments:
Post a Comment